Purnima Auto Meter


Digiprog 3 OBD Version V4.94 Odometer Correction Programmer


Price : ₹ 19,500.00

Weight : 1

Digiprog 3 OBD Version V4.94  Odometer Correction Programmer

2016 New DIGIPROG III Digiprog 3 OBD Version V4.94 + OBD2 ST01 ST04 01/2 04/2 Cable Digi prog 3  Odometer Programmer

 

Why Choose Our Digiprog III? 1. Newest Version: V4.94 2. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands. 3. Worldwide leader in digital speedo programming and correction software. Please read before you buy 1. For this mileage correction tool, it doesn't support all car model, it only support a part of vehicles and models. 2. Please inquiry us whether it support your car before you place an order. 3. Programming via OBD2 Cable, and it has no english use manual. Digiprog3 is a cost-effective mileage correction tool, which supports multi-language and full range or vehicle. V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.88.
Notice: Power-On Password:1 Digiprog 3 V4.94 Other Features: Service Interval Adjustments and Settings Assyst processing Fault memory read-erase EEPROM programmer Integrated PC communication Some Important Tips for Using Digiprog 3: 1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD). 2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg. 3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don't leave it in the trunk of your car) If you are using solvents to remove lacquers from eeprom ensure they are cleaned
4. completely as the solvent can damage the clips.     Digiprog 3 Menu : 1. EEPROM Menu The first option on the main menu is the Eeprom menu. Reading, writing and saving eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction. 2. CAR/TRUCK Menu This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format. 3. Motorcycle Menu This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles. 4. Special Functions Menu The special functions menu is for use only by official DigiProg dealers. 5. Setup Menu This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles. Using the EEPROM Menu : On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started. The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04. Package List : 1pc x Digiprog3 Main Unit 1pc x OBD2 Cable

2016 New DIGIPROG III Digiprog 3 OBD Version V4.94 + OBD2 ST01 ST04 01/2 04/2 Cable Digi prog 3  Odometer Programmer

 

Why Choose Our Digiprog III? 1. Newest Version: V4.94 2. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands. 3. Worldwide leader in digital speedo programming and correction software. Please read before you buy 1. For this mileage correction tool, it doesn't support all car model, it only support a part of vehicles and models. 2. Please inquiry us whether it support your car before you place an order. 3. Programming via OBD2 Cable, and it has no english use manual. Digiprog3 is a cost-effective mileage correction tool, which supports multi-language and full range or vehicle. V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.88.
Notice: Power-On Password:1 Digiprog 3 V4.94 Other Features : Service Interval Adjustments and Settings Assyst processing Fault memory read-erase EEPROM programmer Integrated PC communication Some Important Tips for Using Digiprog 3 : 1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD). 2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg. 3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don't leave it in the trunk of your car) If you are using solvents to remove lacquers from eeprom ensure they are cleaned
4. completely as the solvent can damage the clips.     Digiprog 3 Menu:  1. EEPROM Menu The first option on the main menu is the Eeprom menu. Reading, writing and saving eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction. 2. CAR/TRUCK Menu This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format. 3. Motorcycle Menu This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles. 4. Special Functions Menu The special functions menu is for use only by official DigiProg dealers. 5. Setup Menu This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles. Using the EEPROM Menu: On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started. The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04. Package List: 1pc x Digiprog3 Main Unit 1pc x OBD2 Cable


Features

Type MILEAGE CORRECTION TOOL

Additional Information

Min. Order Quantity 1 Piece(s)
Port SURAT
Payment Terms L/C, D/A, D/P, T/T, Western Union, MoneyGram, Other
Delivery Time AFTER RECIVED 100% PAYMENT
Packaging Details Package List: 1pc x Digiprog3 Main Unit 1pc x OBD2 Cable



Vehicle List




Contact Us

Address : Next to Khushal Das & Company, Meghani Tower Line, Cinema Road, Delhi Gate, Surat, Gujarat - 395003, India

Mobile : +91-9824384765

Phone : +91-261-2429490